Carrier AquaEdge 19XR - Page 60

60
* Rigging weights are for standard tubes of standard wall thickness
(0.025-in. [0.635 mm] wall) and do not include refrigerant weight.
† See Model Number Nomenclature.
NOTES:
1. Evaporator weight includes the suction elbow and the distribution
piping to the economizer and two-pass Victaulic dished heads.
2. Condenser weight includes the high side float chamber, discharge
pipe, and the distribution piping weight from the economizer to the
float chamber and two-pass Victaulic dished heads.
D67 — 40,460 — 2097 — 13,410 — 18 352 — 951 — 6083
D80 — 41,916 — 2359 — 12,447 — 19 013 — 1070 — 5646
D81 — 43,382 — 2359 — 13,388 — 19 678 — 1070 — 6073
D82 — 44,963 — 2359 — 14,401 — 20 395 — 1070 — 6532
D85 — 42,058 — 2359 — 12,609 — 19 077 — 1070 — 5719
D86 — 43,408 — 2359 — 13,475 — 19 690 — 1070 — 6112
D87 — 45,204 — 2359 — 14,626 — 20 504 — 1070 — 6634
D6A — 35,286 — 1947 — 11,401 — 16 005 — 883 — 5171
D6B — 36,328 — 1947 — 12,255 — 16 478 — 883 — 5559
D6C — 37,288 — 1947 — 13,078 — 16 914 — 883 — 5932
D6F — 34,447 — 1947 — 11,448 — 15 625 — 883 — 5193
D6G — 35,637 — 1947 — 12,408 — 16 165 — 883 — 5628
D6H — 36,663
— 1947 — 13,278 — 16 630 — 883 — 6023
D8A — 38,494 — 2190 — 12,366 — 17 461 — 993 — 5609
D8B — 39,633 — 2190 — 13,327 — 17 977 — 993 — 6045
D8C — 40,731 — 2190 — 14,253 — 18 475 — 993 — 6465
D8F — 38,479 — 2190 — 12,419 — 17 454 — 993 — 5633
D8G — 39,761 — 2190 — 13,499 — 18 035 — 993 — 6123
D8H — 40,922 — 2190 — 14,478 — 18 562 — 993 — 6567
Table 15 — 19XR Heat Exchanger Weights (cont)
CODE †
ENGLISH SI
Dry Rigging Weight (lb) * Machine Charge Dry Rigging Weight (kg) * Machine Charge
Evaporator
Only
Condenser
Only
Refrigerant Weight (lb) Water Weight (lb)
Evaporator
Only
Condenser
Only
Refrigerant Weight (kg) Water Weight (kg)
Evaporator Condenser Evaporator Condenser Evaporator Condenser Evaporator Condenser