Press SLEEP button while the unit is in COOL mode.
When this feature is activated, the temperature setting shall be
automatically raised by 1 C after ONE HOUR. At the 2nd hour,
the temperature setting will again be automatically raised up by
1 C. The change of temperature is up to the 2nd hour only.
The temperature rise will not be seen on the LED Screen.
When this feature is activated, the letter “SL” is shown.
To cancel this function press SLEEP button again.
If the temperature setting is changed before the controlled
temperature is raised up, it will be raised up from the last setting.
If the power supply fails the unit is turned off or the operating mode
is changed, the sleep feature will be deactivated.
press the up (+)
or down (-) button to adjust to the desired number of hours.
to speed up cooling
return
To Next Page
Loading...
