Carrier bryant Multi-Zone 38MARBQ24 36AA3 Series - Page 63

Carefully lift up Inverter PCB off, guiding the
loose wires up and out at the same time.
Clean off old
Conductive Grease
and apply new before
reassembling. If this is
not done overheating
can occur.
Inverter & Main PCB Removal (page 3 of 4)
For Sizes 18K, 24K, 30K
38MAQB18~30---3 Outdoor Unit
Factory Authorized Parts™
38AQ680001 Conductive
Grease
Some wires will be
reused if replacing
Inverter PCB.
Continued on next page