100
USB SUPPORT
The Download Picture optionisusedtodownloadabitmapimagetobeusedas
the Screen Saver, which is enabled as described in the Basic Setup section above.
The only file format supported at this time is a 480 x 272 8--bit indexed color
bitmap (.BMP) file. You will need to use picture editing software to convert
pictures into this format as .JPG files are not supported at this time. The filename
also must be 8.3 format, meaning the file must have a name with no spaces from
1 to 8 characters and an extension of .BMP such as “sunset.bmp”. The files must
then be copied to a folder named BMP on the USB Drive. Inserting a USB drive
with properly named and formatted images will display the following screen, as
shown in Fig. 65.
A11101
Fig. 65 -- Available Screen Saver Files (Example)
Select the image you would like to make your screen saver and press LOAD to
download the picture.
Pressing CANCEL will return to the USB screen.
To Next Page
Loading...
