13
QUICK START
Setting the Time and Date
The thermostat is equipped to automatically communicate wirelessly with a
communication network to obtain date and time information. In some instances
the time zone and daylight savings settings may need to be set manually. In the
event of a loss of communications, or the lack of a communications network, the
time and date can be set manually.
Check or set the time/date by performing the following steps:
1. Either touch the screen or press the Home button to activate the Home
screen.
2. Press the Setup button to open the Basic Setup menu.
3. Press the Time/Date icon on the Basic Setup menu screen.
One of three possible screens will open (see Fig. 4):
To Next Page
Loading...
