45
PROGRAMMING THE THERMOSTAT
View the Schedules
Perform the following steps to view a schedule:
1. Press the SETUP button on the Active Home screen.
2. Press the Schedule button on the Basic Setup screen.
3. Select the Schedule to view – All Days, Weekdays/Weekend,orEach Day.
The times and setpoints shown as dashes indicate that the values for each are not
the same for every day of the week.
Programs Schedules
This section describes how to program the thermostat for the three (3) different
schedule options.
All
Days
Use the All Days schedule to program all seven (7) days with the same time
periods and heating / cooling setpoints.
The All Days Schedule will display the program schedule that is executed every
day. The times and setpoints shown as dashes “----” indicate that the setpoint
values are not the same for every day of the week. Refer to Fig. 25.
To Next Page
Loading...
