17
QUICK START
2. The Select Mode screen shows the different mode choices available. See
Fig. 6.
S OFF -- Turns the heating and cooling system off.
S HEAT -- Enables the heating equipment to operate as needed. When
the equipment is operating, a red icon will appear over the HEAT TO
button.
S COOL -- Enables the cooling equipment to operate as needed. When
the equipment is operating, a blue icon will appear over the COOL TO
button.
S AUTO -- Enables both the heating and cooling equipment to operate as
needed. When the equipment is operating, if the heating equipment is
running, then a red icon will appear over the HEAT TO button; if the
cooling equipment is operating, then a blue icon will appear over the
COOL TO button.
S EHEAT -- Enables emergency heat -- also known as auxiliary heat. The
EHEAT selection uses auxiliary heat only. Heat Pump heat is not used.
3. The button for the currently selected mode is indented. Select the desired
mode.
4. Press the DONE button to save the selection or the CANCEL button to
ignore all changes and return to the previous setting.
To Next Page
Loading...
