56
PROGRAMMING THE THERMOSTAT
8. Press the COOL TO button to change the cooling setpoint. Pressing the
up and down arrows with the COOL TO button selected will increase or
decrease the cooling setpoint in one (1) degree increments.
9. Perform Step 5. through Step 8. for each day of the week, advancing to
other days using the middle two buttons (labeled with the day) on the
bottom of the screen.
10. Press the SAVE button to save changes made to the program schedule and
return to the Each Day Schedule screen.
Pressing the CANCEL button will exit the screen without saving the
changes made and will return to the Program Schedule Menu screen.
A11130
Fig. 31 -- Each Day Edit Schedule
To Next Page
Loading...
