15
QUICK START
Using the ExP – Edge Expansion Port – to program the thermostat
Your Edge thermostat has an unique ExP – Edge Expansion
Port – that allows you to use a digital memory card to program
the thermostat on your computer. The ExP is sold separately as
an accessory.
Remove the dual port digital memory card and insert it in your computer’s digital or
USB memory card reader. Follow the onscreen instructions to program
temperatures, the corresponding time, and the day of the week. You can even
schedule your thermostat to remind you to change your furnace filter, the UV light
or humidifier pad. When you’ve completed the process on your computer, simply
reinsert the card back into the ExP port on the thermostat. It will automatically
transfer the settings on the card to the thermostat.
To Next Page
Loading...
