Carrier Edge TP-PRH - Changing from Fahrenheit to Celsius

37
ADVANCED PROGRAMMING OPTIONS
Changing from Fahrenheit to Celsius
Your thermostat is preset to display the temperature in degrees Fahrenheit. You can
change this to Celsius.
1. Open the door.
2. Press and hold the buttons underneath the heat and
cool setpoints simultaneously (the two bottom buttons
on the right) until the screen displays the reset reminders
and 01 in the lower right corner.
3. Press the up arrow button until 01 changes to 02 with F
(Fahrenheit) next to it.
4. Press the rightmost button under the F until C (Celsius)
appears.
5. Press the done button.
6. Close the door.