( 16 )
USE OF REMOTE CONTROL (Cont.)
TURBO FUNCTION
TURBO function with COOL mode :
If you want faster cooling at super high airflow,
super high fan speed to reach the set temperature
in the shortest time, Press TURBO button.
• Turbo function will give faster cooling as super high
fan speed for about 30 minutes.
After 20 minutes, the fan speed will revert back to the
previous set fan speed.
NOTES:
• To cancel TURBO function, Press again TURBO button.
• In TURBO function, the fan speed can be adjusted.
• TURBO Function is not available with ECO function.
• Under cooling mode (except Force Cooling mode), the indoor fan motor will run in Turbo speed
when receive the signal from remote control, and will get back to the presetting speed when receive
again.
• TURBO function will cancel and indoor fan motor will get back to the presetting speed
when one of following condition occur :
a. mode changed.
b. get into Force Cooling mode.
c. turn off the air conditioner.
To Next Page
Loading...
