17
S To set the desired humidity level during cooling, touch COOLING
HUMIDITY.
d Use the Up (Y) and Down (B) buttons to set the maximum dehu-
midification level at NONE or between 55--65%.
d Touch YES or NO for the system to over--cool the conditioned
space by up to 3_ F to remove as much humidity out of the air as
possible.
d Press SAVE when finished, or CANCEL to discard any changes.
Away Comfort Profile Fresh Air Control
You may wish to have different Fresh Air profiles for when you’re away. Press the
menu area on the Main Screen to access the additional menu selections. Select
Comfort Profiles, then select Humidity and Fresh Air Profiles option.
S Touch AWAY to set your fresh air settings while you are away from
home.
S If a ventilator is installed in your home, select the amount of fresh air to
circulate during heating mode by touching HEATING FRESH AIR.
NOTE: This option may not be available with the ERVXXNVA ventilator due to
its simplified control design.
d You will have the option of choosing between AUTO, MANUAL,
or OFF.
d The AUTO setting will allow the user to choose the maximum fresh
air that the ventilator will provide. Selections are Low, Medium or
High.
d The MANUAL setting allows you to select the percentage of fresh
air to supply to your home.
d Use the Up (Y) and Down (B) buttons to set the desired ventilator
speed level.
To Next Page
Loading...
