Carrier INFINITY ZONING CONTROL - User Manual

SYSTXCCUIZ01-- V
Infinityt Control
Installation Instructions
HOLD
COOL
HEAT
OFF
ZONE
INFINITY
™
SYSTEM
A04031
Fig. 1 -- Infinityt Zone Control
NOTE: Read the entire instruction manual before starting the
installation.
TABLE OF CONTENTS
PAGE
SAFETY CONSIDERATIONS 1.........................
INTRODUCTION 1...................................
INSTALLATION AND START--UP OVERVIEW 2..........
INSTALLATION 2....................................
INSTALLING INFINITY ZONE CONTROL 4..............
INITIAL POWER--UP 6................................
QUICK START 8.....................................
INSTALL / SERVICE MENUS 9.........................
EQUIPMENT SUMMARY MENU 9......................
INSTALL MENU 9....................................
SETUP MENU 9......................................
CHECKOUT MENUS 14...............................
SERVICE MENUS 15..................................
OPERATIONAL INFORMATION 16.....................
TROUBLESHOOTING 19..............................
SYSTEM MALFUNCTION SCREEN 20..................
SAFETY CONSIDERATIONS
Improper installation, adjustment, alteration, service, maintenance,
or use can cause explosion, fire, electrical shock, or other
conditions which may cause death, personal injury or property
damage. Consult a qualified installer, service agency or your
distributor or branch for information or assistance. The qualified
installer or agency must use factory--authorized kits or accessories
when modifying this product. Refer to the individual instructions
packaged with the kits or accessories when installing.
Follow all safety codes. Wear safety glasses, protective clothing,
and work gloves. Have a fire extinguisher available. Read these
instructions thoroughly and follow all warnings and cautions
included in literature and attached to the unit. Consult local
building codes and the current edition of the National Electrical
Code (NEC) NFPA 70.
In Canada, refer to the current editions of the Canadian Electrical
Code CSA C22.1.
Recognize safety information. When you see this symbol
on
the unit and in instructions or manuals, be alert to the potential for
personal injury. Understand the signal words DANGER,
WARNING,andCAUTION. These words are used with the
safety-- alert symbol. DANGER identifies the most serious hazards,
which will result in severe personal injury or death. WARNING
signifies hazards, which could result in personal injury or death.
CAUTION is used to identify unsafe practices, which may result
in minor personal injury or product and property damage. NOTE
is used to highlight suggestions which will result in enhanced
installation, reliability , or operation.
INTRODUCTION
The Infinity Zone System consists of several intelligent
communicating components which includes the Infinity Zone
Control (or User Interface), Smart Sensors, Damper Control
Module, variable speed furnace or FE fan coil, 2--stage AC or HP
and Infinity Packaged Products, which continually communicate
with each other via a four--wire connection called the ABCD bus.
Commands, operating conditions, and other data are passed
continually between components over the ABCD bus. The result is
a new level of comfort, versatility , and simplicity.
All Infinity furnaces or fan coils are variable--speed and
multi--stage for maximum flexibility, efficiency , and comfort. They
support controlled ventilation, humidification, dehumidification,
and air quality control. Either an Infinity (communicating) or a
standard 24VAC controlled outdoor unit may be used.
When using conventional outdoor units, the Infinity furnace or fan
coil provides the 24 volt signals needed to control them. Also, the
Infinity Damper Control Module (P/N SYSTXCC4ZC01) allo ws
connection of a Carrier HRV or ERV without the need for a
separate wall control.
All system components are controlled through the wall mounted
Infinity Zone Control, which replaces the conventional thermostat
and provides the homeowner with a single wall control for all
features of the system.

Summary

Safety Considerations

Installation

Infinity Zone Control Location and Wiring Considerations

Guidelines for selecting optimal mounting locations and wiring the control.

Mounting Infinity Zone Control

Initial Power-Up

Power Up Sequence

Details the automated process of establishing communication with system equipment.

Selecting Outdoor Unit

Steps for identifying and selecting the outdoor unit type and size.

Zoning

Equipment Summary

Static Pressure Check

Duct Assessment

Install; Service Menus

Install;Service

Install Menu

Initiates the start-up process to learn all system equipment.

Setup Menu

Accesses various settings for modifying equipment configuration.

Setup - Furnace

Setup - Fan Coil

Setup - Heat Pump; AC

Setup - Hydronic Heat

Setup - Accessories

Setup - System Maintenance

Checkout Menus

Checkout - Furnace or Gas PAC

Exercises the furnace or gas pac operation.

Checkout - Heat Pump Heating

Exercises the heat pump heating mode.

Checkout - Zoning

Duct Assessment

Measures duct capacity per zone and assesses damper leakage.

Service Menus

Service - Furnace Status or Gas PAC Status

Displays operating parameters for furnace or gas pac equipment.

Operational Information

Service - Last 10 System Events

Service - Run; Fault History

System Operation Details

Zone and Airflow Management

Settings for unoccupied zones, all zones mode, and airflow limits.

Dehumidify Operation

Hybrid Heat Setup; Operation

Troubleshooting

Power and Communication Issues

Steps for resolving power-up and communication detection problems.

Zoning and Comfort Issues

Troubleshooting for zone detection and comfort-related airflow problems.

System Malfunction Screen

Fan Coil and Furnace Malfunctions

Lists fault codes specific to fan coil and furnace units.

Outdoor Unit and User Interface Malfunctions

Lists fault codes for outdoor units and the user interface.

Carrier INFINITY ZONING CONTROL Specifications

General

Product Type	Zoning Control Panel
Compatibility	Carrier Infinity System
Zones Supported	Up to 8 zones
Connectivity	Wired
Power Source	24VAC
Display	Touchscreen
Remote Access	Yes