Carrier LENEL S2 - Stainless-Steel Spacer Plate

30
To ensure full function of the tamper switch in the LenelS2 Readers - 5000 Series
reader, the spacer plate should be mounted behind the LenelS2 Readers - 5000
Series card reader’s back plate on uneven wall installations
The acid resistant stainless-steel spacer plate can be used to ensure full function
of the tamper switch in the reader, the spacer plate should be mounted behind the
reader’s back plate on uneven wall installations or similar environments.
Stainless-steel spacer plate
Spacer plate Std/Combi: LNL-R50000-SPS