CONFIGURATION
5
4 5
1
2
Click "Create Account "
Enter an available email
address and create a
password, then click
Registration.
Note: The password is
only for this APP, not for
email system.
1.User Registration on APP
Please ensure the mobile device has connected to
Wi-Fi router. And the router has already connected to
internet before registration and network configuration.
CAUTION:
It is better to log in email box and active registration
account by clicking link in case forget the password.
Make sure the mobile connect to the Wi-Fi network.
Make sure the mobile Wi-Fi function works well and
can be connected to Wi-Fi network automatically.
If the smart kit failed to connect to the router, please
confirm the encryption setting of router should be WPA
2. Set Air conditioner into AP mode
Turn on the air conditioner, press the LED button
on the remote controller for 7 times continuously.
When the display show AP and flash, it means
that the smart kit has already entered the Wi-Fi
network setting mode.
Kindly reminder:
When the air conditioner entered into Wi-Fi network
setting mode, the remote controller can not control
the AC before the Wi-Fi network setting finished.
If there is no setting operation under Wi-Fi network
setting mode, the air conditioner will quit this mode
automatically 8 minutes later ,then the user can
control the AC with remote controller normally.
1
2
AP
To Next Page
Loading...
