Need help?Do you have a question about the Carrier split room air conditioner remote control and is the answer not in the manual?
General| Brand | Carrier |
|---|---|
| Type | Split Room Air Conditioner Remote Control |
| Compatibility | Carrier Split Room Air Conditioners |
| Power Source | Batteries (usually AAA or AA, check your specific model) |
| Display | LCD |
| Functions | Temperature control, mode selection, fan speed, timer, swing, sleep mode |
Use remote controller within 8m, pointing towards receiver. Beep confirms reception. Keep signals unobstructed.
Do not block signals, prevent liquid, avoid direct sunlight or heat. Use curtains to prevent sunlight from falling on receiver.
Use two R03/LR03 batteries. Remove cover, replace batteries correctly, reattach cover. Reprogramming required after replacement.
Lists operating modes (AUTO, COOL, DRY, HEAT, FAN), timer setting, indoor setting temperature range, and LCD function.
Details the function of various buttons including MODE, ON/OFF, FAN SPEED, AIR DIRECTION, SWING, LED, RESET, F/C, and TEMP.
Lights when remote transmits signals to the indoor unit.
Shows current operation mode: AUTO, COOL, DRY, HEAT, FAN.
Displayed when ON/OFF button is pressed. Disappears when pressed again.
Shows indoor setting temperature (17-30°C). No display in FAN mode.
Indicates the current time (0-24 hours).
Shows the time set for timer operation (0-24 hours).
Displayed when LOCK button is pressed. Disappears when pressed again.
Shows selected fan speed: AUTO, LOW, MED, HIGH.
Displayed when SLEEP button is pressed. Disappears when pressed again.
Displayed when Follow Me function is activated.
Sets the remote controller clock. Display shows '12:00' and flashes after battery insertion. Readjusting the clock is also described.
Describes the RESET button for canceling settings and the F/C button for switching temperature units (Celsius/Fahrenheit).
Unit logically chooses COOL, FAN, HEAT, or DRY mode based on temperature. Fan speed is automatic.
Select COOL, HEAT, or FAN mode. Set temperature and fan speed (Auto, Low, Med, High).
Select DRY mode. Set temperature. Fan speed is automatically controlled.
Use AIR DIRECTION to set louver position and SWING to activate automatic up/down movement.
Sets the air conditioner to turn on or off at a specific time. Use TEMP buttons to set desired time.
Simultaneously sets both ON and OFF timers for convenience, e.g., stop at night, start in morning.
Automatically adjusts temperature for comfort and energy saving during sleep. Available in COOL, HEAT, AUTO modes.
To Next Page