Carrier WTC-RCI-S User Manual

1
This manual describes how to use WTC Room
Control Interfaces.
Depending on the type of the user interface,
some of the functions described in this manual
may not be active.
If you have any questions, please contact your
installer for more information.
Water Terminal Controller
Room Control Interface
WTC-RCI-S WTC-RCI-SF WTC-RCI-SOF
Scan this QR code
to access Carrier
technical literature.
Occupancy
To optimise energy effi ciency of the
building while preserving its occupants
comfort, the controller is scheduled
according to occupancy hours.
You can set the room
occupancy manually if the
scheduled program does
not match the current
occupancy status of the
room.
To set room occupancy
■ Press the Occupancy button to change
the occupancy status of the room.
the occupancy status of the room.
Occupied room (light ON)
Unoccupied room (light OFF)
Occupancy button
Comfort Temperature
To achieve better
comfort, it is possible
to control the comfort
temperature by
adjusting the
temperature
control knob.
To set the comfort temperature
■ Turn the control knob to the right
to increase the temperature.
■ Turn the control knob to the left to
decrease the temperature.
Note: Comfort temperature can be
adjusted only when the status of
the room is occupied.
Temperature control knob
Fan Speed
Auto Fan speed is
adjusted
automatically in
order to provide
optimum comfort
O ff Fan Off
I Low speed
II Medium speed
III High speed
To set the fan speed
■ Turn the control knob to set the
required fan speed.
Note: Fan speed can be adjusted
only when the status of the room is
occupied.
Fan control knob
English

Carrier WTC-RCI-S Specifications

General

Brand	Carrier
Model	WTC-RCI-S
Category	Remote Control
Language	English