Carrier WTC-RCI-S - Installation Instructions Manual

1
Remote Temperature
WTC-RT / WTC-RCI
Installation instructions
Package contents
■ User interface
■ End-user manual
Installation precautions
Introduction
Read the instructions carefully before
placing this device. The manufacturer
declines all responsibility for any
inconveniences or damages caused by not
complying with instructions given in this
manual. All warranty claims are void if
instructions provided in this manual are
not observed.
■ Onlyqualiedinstallersshouldbe
allowed to install and service the
equipment.
■ All instructions provided in this
manual should be read and followed.
■ Incoming equipment should be
carefully checked for possible damage
caused during transport or by incorrect
handling.Incaseofdamage,lea
claim with the transport company.
General installation requirements
■ After the installation, carry out a
complete system check and explain all
system functions to the user.
■ Dispose of all packaging materials in
accordance with all applicable local
regulations.
■ Take precautions to prevent
electrostatic discharge to the device
when installing, servicing or operating
the equipment.
Environmental
Storage temperature: -20 to 50°C
Relative humidity: 0 to 95% non-condensing
Operating temperature: 5 to 40°C
WTC-RT WTC-RCI-S WTC-RCI-SF WTC-RCI-SOF
English