Carrier PROGRAMMABLE THERMOSTAT User Manual

PROGRAMMING THE THERMOSTAT
3 When the correct time appears on the display,
press the END button.
NOTE: If you choose not to press the END button,
the word TIME will stop flashing after 15 seconds.
Setting mode operation
1 Press MODE button.
2 When the MODE button is pressed, the words
OFF,
HEAT,
COOL,
2

Carrier PROGRAMMABLE THERMOSTAT Specifications

General

Temperature Range	45°F to 90°F (7°C to 32°C)
Display	Backlit
Programmability	7-day
Power Source	Battery-powered or hardwired (depends on model)
Warranty	1 year limited warranty