RG-10:Service Manual
Manufacturer reserves the right to change, at any time, specifications and designs without notice and without obligations.
3
FUNCTION BUTTONS
Before you use your new system, familiarize yourself with the remote controller. The following is a brief introduction of the remote controller.
Fig. 8 — Remote Controller
NOTE: To alternate between C and F, buttons must be pressed gently, otherwise the remote will not recognize the command.
Turns the indoor unit’s LED display
and air conditioner buzzer on and,
off, which creates a comfortable and
quiet environment. If you press and
hold LED for 5 seconds, it displays
the return air temperature at the unit
versus the set point temperature.
To Next Page
Loading...
Need help?
General
