Carrier RG56V Series - Basic Functions Operation; Performing Basic Operations; Setting Timer Functions

HOW TO USE BASIC FUNCTIONS
06
05
3.1 BASIC OPERATIONS
AUTO
Mode
Select AUTO mode Set your desired temperature
On/Off
NOTE:
1. In AUTO mode for heat pump system, the air conditioner can automatically choose the mode of Cool, Heat or Fan
by sensing the difference between the actual room temperature and setting temperature.
2. In AUTO mode for cooling only system, the air conditioner can automatically choose the mode of Cool or Fan
by sensing the difference between the actual room temperature and setting temperature.
3. In AUTO mode, fan speed can not be set.
Mode
Fan
Turn on the air conditioner
COOL
or
HEAT
Mode
Select COOL/HEAT mode
Set the temperature
On/Off
Mode
Turn on the air conditioner
Set the fan speed
DRY
Mode
Select DRY mode Set the temperature
On/Off
NOTE:
In DRY mode, fan speed can not be set since it has already been automatically controlled.
Mode
Turn on the air conditioner
Fan
FAN
Mode
Select FAN mode
On/Off
Mode
Turn on the air conditioner Set the fan speed
Before operation, please ensure the unit is plugged in and power is available.
ATTENTION
3.2 TIMER FUNCTION
TIMER ON/OFF - Set the amount of time after which the unit will automatically turn on/off.
TIMER
ON
Press to initiate
the ON time sequence.
Press it for multiple times to set
the desired time to turn on the unit.
NOTE:
1. When setting the TIMER ON or TIMER OFF, the time will increase by 30 minutes increments with each press, up to 10 hours.
After 10 hours and up to 24, it will increase in 1 hour increments. (For example, press 5 times to get 2.5h, and press 21 times to
get 11h,) The timer will revert to 0.0 after 24.
2. Cancel either function by setting its timer to 0.0h.
Point remote to unit and wait 2sec,
the TIMER ON will be activated.
n
h
My Mode
Follow Me
LED Turbo
Ioniser
Swing
Timer
Self Clean
Mode
On/Off
Fan
Sleep
AUTO
COOL
DRY
HEAT
FAN
HIGH
MED
LOW
SET TEMPERATURE
TIMER
OFF
Press to initiate
the OFF time sequence.
Press it for multiple times to set
the desired time to turn off the unit.
Point remote to unit and wait 2sec,
the TIMER OFF will be activated.
n
h
My Mode
Follow Me
LED Turbo
Ioniser
Swing
Timer
Self Clean
Mode
On/Off
Fan
Sleep
AUTO
COOL
DRY
HEAT
FAN
HIGH
MED
LOW
SET TEMPERATURE
OFF
Setting TIMER ON & OFF (example).
5
h
My Mode
Follow Me
LED Turbo
Ioniser
Swing
Timer
Self Clean
Mode
On/Off
Fan
Sleep
AUTO
COOL
DRY
HEAT
FAN
HIGH
MED
LOW
SET TEMPERATURE
10
h
OFF
My Mode
Follow Me
LED Turbo
Ioniser
Swing
Timer
Self Clean
Mode
On/Off
Fan
Sleep
AUTO
COOL
DRY
HEAT
FAN
HIGH
MED
LOW
SET TEMPERATURE
ON
Current
time 1PM
2:00PM 3:00PM
4PM 5PM
6PM
Timer starts
Unit turns
ON
Unit turns
OFF
2.5 hours later
5 hours later
3:30PM
Example: If current timer is 1:00PM,
to set the timer as above steps, the
unit will turn on 2.5h later (3:30PM)
and turn off at 6:00PM.