Carrier rg56V - How to Use Basic Functions; Basic Operations; Timer Function

HOW TO USE BASIC FUNCTIONS
06
05
3.1 BASIC OPERATIONS
AUTO
Mode
Select AUTO mode Set your desired temperature
On/Off
NOTE:
1. In AUTO mode for heat pump system, the air conditioner can automatically choose the mode of Cool, Heat or Fan
by sensing the difference between the actual room temperature and setting temperature.
2. In AUTO mode for cooling only system, the air conditioner can automatically choose the mode of Cool or Fan
by sensing the difference between the actual room temperature and setting temperature.
3. In AUTO mode, fan speed can not be set.
Mode
Fan
Turn on the air conditioner
COOL
or
HEAT
Mode
Select COOL/HEAT mode
Set the temperature
On/Off
Mode
Turn on the air conditioner
Set the fan speed
DRY
Mode
Select DRY mode Set the temperature
On/Off
NOTE:
In DRY mode, fan speed can not be set since it has already been automatically controlled.
Mode
Turn on the air conditioner
Fan
FAN
Mode
Select FAN mode
On/Off
Mode
Turn on the air conditioner Set the fan speed
Before operation, please ensure the unit is plugged in and power is available.
ATTENTION
3.2 TIMER FUNCTION
TIMER ON/OFF - Set the amount of time after which the unit will automatically turn on/off.
TIMER
ON
Press to initiate
the ON time sequence.
Press it for multiple times to set
the desired time to turn on the unit.
NOTE:
1. When setting the TIMER ON or TIMER OFF, the time will increase by 30 minutes increments with each press, up to 10 hours.
After 10 hours and up to 24, it will increase in 1 hour increments. (For example, press 5 times to get 2.5h, and press 21 times to
get 11h,) The timer will revert to 0.0 after 24.
2. Cancel either function by setting its timer to 0.0h.
Point remote to unit and wait 2sec,
the TIMER ON will be activated.
n
h
M
y
M
o
de
F
o
l
lo
w Me
LED T
u
rbo
I
on
i
ser
Swi
n
g
T
ime
r
S
elf C
lean
Mode
On
/
Of
f
F
an
S
leep
AU
TO
CO
O
L
DRY
HEAT
FAN
HIGH
MED
LOW
SET TEMPERATURE
TIMER
OFF
Press to initiate
the OFF time sequence.
Press it for multiple times to set
the desired time to turn off the unit.
Point remote to unit and wait 2sec,
the TIMER OFF will be activated.
n
h
My Mode
Follow Me
LE
D T
ur
bo
Ioniser
Swin
g
Tim
e
r
S
e
l
f
Clean
Mode
On
/Off
Fan
S
le
ep
AUTO
CO
OL
DRY
HEAT
FA
N
HIGH
MED
LOW
SE
T
TEMP
ERAT
URE
OFF
Setting TIMER ON & OFF (example).
5
h
My Mode
F
o
ll
ow
Me
LED Turbo
Ioniser
Sw
i
ng
Time
r
Self Clean
M
o
d
e
O
n/O
ff
F
an
S
lee
p
AUTO
COOL
DRY
HEAT
FAN
HIGH
MED
LOW
SET TEMPERATURE
10
h
OFF
My
Mode
Fo
l
low
M
e
L
ED Tur
b
o
Ioni
se
r
Sw
ing
Timer
Self Clean
M
o
d
e
On/Off
F
a
n
S
le
e
p
AUTO
COO
L
DRY
HEAT
FAN
HI
G
H
ME
D
LOW
SET T
E
MPERATURE
ON
Current
time 1PM
2:00PM 3:00PM
4PM 5PM
6PM
Timer starts
Unit turns
ON
Unit turns
OFF
2.5 hours later
5 hours later
3:30PM
Example: If current timer is 1:00PM,
to set the timer as above steps, the
unit will turn on 2.5h later (3:30PM)
and turn off at 6:00PM.
G B