Carrier RG67N/BGEF - Basic Remote Control Operations; Basic Operation Guide

06
3. HOW TO USE BASIC FUNCTIONS
3.1 BASIC OPERATIONS
ATTENTION
Before operation, please ensure the unit is plugged in and power is available.
AUTO
Mode
Select AUTO mode Set your desired temperature Turn on the air conditioner
Mode
On/Off
NOTE:
1. In AUTO mode for heat pump system, the air conditioner can automatically choose the mode
of Cool, Heat or Fan by sensing the difference between the actual room temperature and
setting temperature.
2. In AUTO mode for cooling only system, the air conditioner can automatically choose the mode
of Cool or Fan by sensing the difference between the actual room temperature and setting
temperature.
3.
In
AUTO mode, fan speed can not be set.
COOL
or
HEAT
Mode
Select COOL/HEAT mode Set the temperature Set the fan speed Turn on the air conditioner
Mode
Fan
On/Off
DRY
Mode
Select DRY mode Set the temperature Turn on the air conditioner
Mode
On/Off
NOTE:
In DRY mode, fan speed can not be set since it has already been automatically controlled.
FAN
Mode
Select FAN mode Set the fan speed Turn on the air conditioner
Mode
Fan
On/Off