Carrier’s Thermidistat Control is
the command center of your indoor
weather system.
By providing both
temperature and humidity control, this sim-
ple yet powerful device lets you take the
steam out of summer, the static out of win-
ter and helps eliminate that annoying mois-
ture build-up on your windows when it’s
cold outside. It’s never been quite this easy.
Comfort command center.
control
Carrier puts your family’s comfort
at your fingertips with simple
instructions, responsive push but-
tons and an easy-to-read backlit
LCD display.
Once set, the
Thermidistat Control reliably monitors
indoor conditions and responsively meets
your comfort demands for consistent,
energy-efficient indoor weather.
Making life easier.
features
NOTE: Not all messages displayed in the above illustration will appear at once in any situation. •Available on selected models.
MODE Button selects OFF, HEAT,
COOL, or AUTO operation. EMER-
GENCY HEAT (EHEAT) mode is also
included when the Thermidistat
Control is installed with a heat pump.
FAN Button choos-
es ON or AUTO fan
operation.
▲
Room Tempera-
ture Display
shows current
room temperature.
▲
▲
SET HUM Button
allows you to
change humidifi-
cation set point.
SET TIME Button
allows you to enter
the time of day.
SET HEAT Button
allows you to enter
your desired heat-
ing set point.
VACATION Button changes
temperature and humidity set
points to lower levels for opti-
mum energy efficiency while
you’re away.
▲
RESET FILTER Function restarts
the timer that determines the next
air filter change or cleaning.
Activated by pressing VACATION
and END buttons simultaneously.
▲
END Button com-
pletes the tempera-
ture and humidity
set-up sequence.
▲ ▲
▲
SET COOL Button
allows you to enter
your desired cool-
ing set point.
▲
SET DHUM Button
allows you to
change dehumidifi-
cation set point.
▲
Up and Down Buttons change
the temperature and humidity set
points. They are also used to
access outdoor temperature and
indoor humidity levels.
▲
*Outdoor
Temperature
Display shows the
outdoor temperature.
▲
*Auxiliary Heat
Indicator is dis-
played when a heat
pump system’s aux-
iliary heat is on.
▲
Time of Day
Display exhibits
the time of day.
▲▲
Clean Filter
Indicator lets you
know it is time to
clean or replace your
system’s air filter.
Temperature
Settings Display
shows the temper-
ature settings for
current time period.
▲
▲
To Next Page
Loading...
