SETTING AND OPERATING THE THERMOSTAT
3
Press the MODE
button to select the second temperature
setting (either HEAT or COOL).
4
Press the UP or DOWN
buttons until your second desired
temperature set point is displayed.
NOTE: Your COOL setting must be at least
2° higher than your HEAT setting. Your
thermostat will automatically change your
previously set temperature to maintain that
2° difference.
Setting fan operation
1
Press the FAN button to switch
between ON and AUTO fan settings.
When the ON mode is
selected, the fan runs
continuously for improved
air circulation. FAN on
indicator will be displayed
on LCD.
2
To Next Page
Loading...
