Carrier TRANSICOLD 05G - Table of Contents

To Next Page

To Previous Page

TABLE OF CONTENTS

Section Page

1DESCRIPTION 1-1.........................................................

1.1 Introduction 1-1............................................................

1.2 General Description 1-1......................................................

1.3 Compressor Reference Data 1-1...............................................

1.4 Detailed Description 1-3.....................................................

1.4.1 Suction and Discharge Valves 1-3.......................................

1.4.2 Suction & Discharge Service Valves 1-3..................................

1.4.3 Lubrication System 1-3................................................

1.5 Compressor Unloader 1-4....................................................

1.5.1 Hot Gas Bypass Unloader 1-4.........................................

1.5.2 Suction Cutoff Unloader 1-5...........................................

1.5.3 Pressure---Operated Unloaders 1-6.....................................

2 COMPRES SOR REPLACEMENT 2-1.........................................

2.1 Compressor Removal 2-1.....................................................

2.2 Compressor Replacement 2-1.................................................

2.2.1 Installing Compressor Unloaders 2-1....................................

2.2.2 Installing Compressor 2-2.............................................

3 COMPRESSOR MAINTENANCE 3-1..........................................

3.1 Introduction 3-1............................................................

3.2 Inspection and Preparation for Reassembly 3-1..................................

3.3 Cylinder Head and Valve Plate 3-1.............................................

3.4 Oil Pump and Bearing Head 3-2..............................................

3.4.1 Low Profile Gear Pump 3-2............................................

3.4.2 Gear Pump 3-3......................................................

3.4.3 Vane Pump 3-4......................................................

3.5 Shaft Seal 3-5...............................................................

3.6 Compressor Running Gear Removal 3-5........................................

3.7 Compressor Running Gear Reassembly 3-7......................................

3.8 Suction Strainer 3-8.........................................................

3.9 Adding Oil 3-8..............................................................

3.10 Installing Compressor 3-8....................................................