@
@
SYMPTOM: When controlling a residential heat
pump, and asking for cooling, the heat
comes on.
CAUSE: Heat pump is not selected "on" in the
Advanced Setup.
REMEDY: Select heat pump on during Advanced
Setup programming. Consult the Owner's
Manual.
SYMPTOM: When calling for cooling, both
the heat and cool come on.
CAUSE: The Advanced Setup is configured
to control a heat pump, and the hvac
the thermostat is controllingis a
"conventional" (non heat pump)
system.
REMEDY: Consult the Owner's Manual in
the Advanced Setup section to turn
off the heat pump.
STAR TSTATCCPB101
( ( TSTATIBBI_101
P474-1010
v_U_F_ _rds
F_X_ P_ME OR (_FK_ USE
4Z95
PIN 88-331
Poge 12
To Previous Page
Loading...
