21
62--10601
UNIT DATA
The following table has columns for Code and English displays.
English is the default setting. Change Functional Parameter to
Code to see Code display format.
Unit Data Codes
CODE ENGLISH DATA
CD1 SUCT Suction Pressure
CD2 ENG Engine Hours
CD3 WT CoolantTemperature
CD4 RAS Return Air Temperature
*CD5 SAS Supply Air Temperature
*CD6 REM Remote Air Temperature
CD7 ATS Ambient Air Temperature
CD8 -- -- -- Door Open/Closed
CD9 CDT Discharge Temperature
CD10 BATT Battery Voltage
CD11 SBY Standby Hours
CD12 MOD V Future Expansion
CD13 REV Software Revision
CD14 SERL Serial Number Lower
CD15 SERU Serial Number Upper
CD18 MHR1 Maintenance Hour Meter 1
CD19 MHR2 Maintenance Hour Meter 2
CD20 SON Switch On Hour Meter
* Codes 5 & 6 are variable. SAS is displayed when
the SUP Probe Function is selected. REM is dis-
played when the REM Probe Function is selected.
(See Functional Parameter List on Page 19.)
To Next Page
Loading...
