EasyManua.ls Logo

Carrier WeatherMaker 50TCQ - Pulley Adjustment; Motor Pulley Turns Open

Carrier WeatherMaker 50TCQ
104 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
65
FAN PERFORMANCE (cont.)
Table 47 PULLEY ADJUSTMENT
UNIT
MOTOR/
DRIVE COMBO
MOTOR PULLEY TURNS OPEN
0 0.5 1 1.5 2 2.5 3 3.5 4 4.5 5 5.5 6
04
3phase
Medium Static 1251 1208 1165 1121 1078 1035 992 949 905 862 819 --- ---
High Static 1466 1423 1380 1337 1294 1251 1207 1164 1121 1078 1035 --- ---
05
3phase
Medium Static 1303 1265 1226 1188 1150 1112 1073 1035 997 958 920 --- ---
High Static 1466 1423 1380 1337 1294 1251 1207 1164 1121 1078 1035 --- ---
06
3phase
Medium Static 1380 1349 1317 1286 1254 1223 1192 1160 1129 1097 1066 --- ---
High Static 1639 1596 1553 1510 1467 1424 1380 1337 1294 1251 1208 --- ---
07
3phase
Standard Static 1192 1161 1129 1098 1066 1035 1004 972 941 909 878 --- ---
Medium Static 1380 1349 1317 1286 1254 1223 1192 1160 1129 1097 1066 --- ---
High Static 1639 1596 1553 1510 1467 1424 1380 1337 1294 1251 1208 --- ---
08
3phase
Standard Static 652 633 614 594 575 556 537 518 498 479 460 --- ---
Medium Static 838 813 789 764 739 715 690 665 640 616 591 --- ---
High Static 1084 1059 1035 1010 986 961 936 912 887 863 838 --- ---
09
3phase
Standard Static 652 633 614 594 575 556 537 518 498 479 460 --- ---
Medium Static 838 813 789 764 739 715 690 665 640 616 591 --- ---
High Static 1084 1059 1035 1010 986 961 936 912 887 863 838 --- ---
12
3phase
Standard Static 652 633 614 594 575 556 537 518 498 479 460 --- ---
Medium Static 838 813 789 764 739 715 690 665 640 616 591 --- ---
High Static 1084 1059 1035 1010 986 961 936 912 887 863 838 --- ---
14
3phase
Standard Static 676 659 642 625 608 592 575 558 541 524 507 * *
Medium Static ** ** 833 813 793 773 753 734 714 694 674 654 634
High Static ** ** 971 953 935 917 899 882 864 846 828 810 792
NOTE: Do not adjust pulley further than 5 turns open.
--- Fa c t o r y s e t t i n g s
* Do not set motor pulley above 5 turns open for A or AX section belts
** Do not set motor pulley below 1 turn open for B or BX section belts
50TCQ

Table of Contents

Related product manuals