Carrier Weathermaster 48P030-100 - Page 298

CL-20
-
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -- - - - - - - - - - - - - - - - - - - -
CUT ALONG DOTTED LINE CUT ALONG DOTTED LINE
ITEM EXPANSION RANGE DEFAULT SETTING
UNIT UNIT CONFIGURATION
C.TYP Machine Control Type 1 to 4 (multi-text strings) 4
SIZE Unit Size (30-100) 3 to 100 30
FN.MD Fan Mode (0=Auto, 1=Cont) 1 to 1 (multi-text strings) 1
RM.CF Remote Switch Config 0 to 3 (multi-text strings) 0
CEM CEM Module Installed Yes/No No
TCS.C Temp.Cmp.Strt.Cool Factr 0 to 60 min 0
TCS.H Temp.Cmp.Strt.Heat Factr 0 to 60 min 0
SFS.S Fan Fail Shuts Down Unit Yes/No No
SFS.M Fan Stat Monitoring Type 0 to 2 (multi-text strings) 0
VAV.S VAV Unocc.Fan Retry Time 0 to 720 min 50
50.HZ 50 Hertz Unit? Yes/No No
MAT.S MAT Calc Config 0 to 2 (multi-text strings) 1
MAT.R Reset MAT Table Entries? Yes/No No
MAT.D MAT Outside Air Default 0 to 100% 20
ALTI Altitude……..in feet: 0 to 60000 0
DLAY Startup Delay Time 0 to 900 secs 0
AUX.R Auxiliary Relay Config 0 to 3 (multi-text strings) 0
D.183 Disable T183 Alert 0 to 1
SV.DH SAV Optimized for Dehumidification Yes/No
SENS INPUT SENSOR CONFIG
SENSSPT.S Space Temp Sensor Enable/Disable Disable
SENSSP.O.S Space Temp Offset Sensor Enable/Disable Disable
SENSSP.O.R Space Temp Offset Range 1 to 10 5
SENSSRH.S Space Air RH Sensor Enable/Disable Disable
SENSRRH.S Return Air RH Sensor Enable/Disable Disable
SENSFLT.S Filter Stat.Sw.Enabled? Enable/Disable Disable
COOL COOLING CONFIGURATION
A1.EN Enable Compressor A1 Enable/Disable Enable
A2.EN Enable Compressor A2 Enable/Disable Enable
A3.EN Enable Compressor A3 Enable/Disable Enable
B1.EN Enable Compressor B1 Enable/Disable Enable
B2.EN Enable Compressor B2 Enable/Disable Enable
B3.EN Enable Compressor B3 Enable/Disable Enable
CS.A1 CSB A1 Feedback Alarm Enable/Disable Enable
CS.A2 CSB A2 Feedback Alarm Enable/Disable Enable
CS.A3 CSB A3 Feedback Alarm Enable/Disable Enable
CS.B1 CSB B1 Feedback Alarm Enable/Disable Enable
CS.B2 CSB B2 Feedback Alarm Enable/Disable Enable
CS.B3 CSB B3 Feedback Alarm Enable/Disable Enable
Z.GN Capacity Threshold Adjst 0.1 to 10 1
MC.LO Compressor Lockout Temp –20 to 55 dF 53
LLAG Lead/Lag Configuration 0 to 2 (multi-text strings) 0
M.M. Motor Master Control? Yes/No No
SCT.H Maximum Condenser Temp 100 to 150 dF 115
SCT.L Minimum Condenser Temp 40 to 90 dF 72
DG.A1 A1 is a Digital Scroll Yes/No No
MC.A1 A1 Min Digital Capacity 10 to 100% 50
CONTROLS SET POINT AND
CONFIGURATION LOG (HEATING)
MODEL NUMBER: Software Version
SERIAL NUMBER: MBB CESR131461--
DATE: RXB CESR131465--
TECHNICIAN: EXB CESR131465--
NAVI CESR130227--
SCB CESR131226--
CEM CESR131174--
MARQ CESR131171--
CXB CESR131173--
EXV CESR131172--