To Next PageTo Next PageWhat to do if my Carrier XPower Air Conditioner is not working?
If your Carrier Air Conditioner isn't working, try these steps: First, press the START/STOP (ON/OFF) button on the remote controller again. Second, check if the power switch is turned on and turn it on if it's off. Also, cancel any timer operations that may be active. Replace the batteries in the remote. Lastly, change the operation mode.
General| Power Supply | 220-240V, 50Hz |
|---|---|
| Type | Split System |
| Refrigerant | R410A |
| Noise Level (Outdoor) | 50 dB |
| Air Flow (Indoor) | 500 m³/h |
| Heating Capacity | 18000 BTU/h |
| Operating Temperature (Cooling) | 18°C to 43°C |
Details on R32 refrigerant and adherence to IEC/EN safety standards.
Essential safety guidelines, warnings, and hazard symbols for unit operation and handling.
Information on safe carton handling, storage, and identification of unit parts.
Overview of wireless remote controller parts, display icons, and fundamental operations.
How to set timer, sleep, high power, preset, and self-clean modes using the remote.
Explanation of the wired remote controller's display elements and operation buttons.
Correct usage, timer functions, and power saving modes for the wired remote.
How to adjust airflow direction, swing, and fix louver positions for optimal cooling.
Guidelines for regular maintenance tasks like filter cleaning and periodic checks.
Guide to identifying and resolving common problems, error codes, and abnormal symptoms.
Instructions and safety advice for installing the unit and recommended operating conditions.
