Carry Pro118 - Page 18

18
◼
Skip Unknown
Skip unknown format(s).
Scroll to select "6.7.1 Unknown Format >> Skip Unknown”, then press "OK" to
save this setting.
6.4.2 Erase Master
This function allows user to enable or disable the source port for sanitization.
Scroll to select "6.7.2 Erase Master”, then press "OK.” Then scroll through to
select one of two settings.
◼
Disabled
Source port will be unable to erase.
Scroll to select "6.7.2 Erase Master >> Disabled”, then press "OK" to save this
setting.
◼
Enabled
Source port will be able to erase.
Scroll to select "6.7.2 Erase Master >> Enabled”, then press "OK" to save this
setting.
6.4.3 Erase Pattern
Scroll to select "6.7.3 Erase Pattern”, then press "OK”. Then scroll through to
select one of two settings.
◼
ONE Byte
Random character will be written per byte.
Scroll to select "6.7.3 Erase Pattern >> One Byte”, then press "OK” to save this
setting.
◼
Big Random Data
Random characters are written to a set of area.
Scroll to select "6.7.3 Erase Pattern >> Big Random Data”, then press "OK" to
save this setting.