Carry Pro118 - Restore Default

19
6.4.4 Wait HDD Time
Sets device power up buffer time prior to copy, erase, etc...
Scroll to select "6.7.4 Wait HDD Time”, then press "OK" to set buffer time from
3 to 30 seconds. The default is 15 seconds.
6.4.5 Transfer Rate
Allows user to select the transfer rate.
Scroll to select "6.7.8 Transfer Rate”, then press "OK". Select the desired
transfer mode from UDMA2 to 7.
The default is UDMA5.
6.4.6 Stop Motor Time
Sets device power down buffer time prior to device disconnection.
Scroll to select "6.7.9 Stop Motor Time”, then press "OK" to set buffer time
from 1 to 20 seconds. The default is 5 seconds.
6.5 Restore Default
Restores all settings back to manufacturer defaults.
Scroll to select "6.8 Restore Defaults”, then press "OK" to restore settings.