Carson MicroFlip MP-250 Manual

USING ADAPTER CLIP
UV LIGHT:
3
Some subjects may have enhanced resolution
when using the UV light.
Press and hold the UV light switch to activate
the UV light.
Please note, the UV light is deactivated when
the base plate is flipped down to the base of
the microscope.
ADJUSTING ZOOM & FOCUS
Align the camera of the
phone to the center of the
circular hole of the adpater
clip.
To maximize your image,
pinch screen to enlarge.
For best results, use in
video mode.
MULTIPLE CAMERA PHONES:
If there is more than one rear facing
camera, use the primary one. Typically,
the primary is a 1x wide-angle color
camera and the other camera(s) are
secondary.
For the latest instructions on multiple
camera phones, please visit
www.carson.com/multicam
Attach the adapter clip to the
top of the microscope and turn
on camera.
If viewing image is not centered
or is not a complete round
image, adjust adapter clip
making sure it is centered over
camera.
Note: Always hold the phone
securely during use. If you
release the phone while it is
attached to the microscope it
can fall and damage the phone.
CARE
Clean using microfiber lens cloth. Do not use any
abrasives, chemical cleaners, or solvents.
Customer Service:
If you experience any difficulties, please contact us and we will be happy to help you.
info@carson.com
uksupport@carson.com eusupport@carson.com
For warranty information, visit www.carson.com/warranty
Carson Optical 2070 5th Avenue, Ronkonkoma, NY 11779 | Tel: 631-963-5000
www.carson.com
WARNING: Do not look
directly at UV light.

Carson MicroFlip MP-250 Specifications

General

Illumination	Yes
Maximum magnification	250 x
Minimum magnification	100 x
Product color	Black, Stainless steel
Microscope type	Digital microscope
Built-in display	-
Power source	Battery
Built-in camera	No

Weight and Dimensions

Depth	61 mm
Width	32 mm
Height	109 mm
Weight	74 g
Package depth	36 mm
Package width	66 mm
Package height	135 mm
Package weight	111 g