1
..". Chapter 2
Speaker Placement
Eg/Ja/ diStance
Since there are many different speaker designs available, you should closely follow the
recommendations of your speaker manufacturer, with the addition of the following points.
t
1. Adjust the toe-in so that they both
point in towards the listening chair.
2. To get the best results from the Sonic
Hologram circuit, the left speaker should be
set exactly the same distance away from your
listening position as the right speaker. While
this relationship is important in any stereo
system, it is more important when using the
Sonic Hologram. It might help to place a
coin as a marker, on the center of the chair.
Measure from this point to the center of each
speaker and adjust until they are the same
distance away.
3. Ideally, the speakers should be no closer
than two feet from the rear and side walls, in
order to reduce any reflections that might
upset the Sonic Hologram imaging. If your
speakers are closer than this, you can
experiment by adding sound deadening
material, such as curtains, on the walls to
reduce any unwanted reflections. For more
details of the Sonic Hologram, see page 19.
e
To Next Page
Loading...
