MONITOR 1-6 XLR OUTPUT CONNECTORS The C-SERIES provides
balanced XLR outputs.
GROUP 1-4 OUTPUT JACKS The C-SERIES provides 4 balanced 1/4” outputs.
RETURNS 3 & 4 L-R INPUT JACKS Connect your effects processors’ stereo
outputs to these jacks.
REC OUT L-R RCA JACKS for recording.
HEADPHONE 1/4” JACK for headphone or control room.
LEFT & RIGHT XLR OUTPUT CONNECTORS
for connecting the main L/R
output to power amps or recording gear.
MONO/SUB XLR OUTPUT CONNECTOR A balanced XLR output is
featured for center mono main mix or subwoofers.
USB POWER PORTS supplies +5V allows powering/recharging your I-Pod™
or the use of our LED desk lights (sold seperately).
9-BAND EQ SWITCH 1 & 2
These switches swap the 9-band EQ’s from the standard L/R main outputs, to
the MON 1 & MON 2 outputs.
DUAL PRECISION 9 BAND GRAPHIC EQs
are one octave filters at 63,125, 250, 500, 1k, 2k, 4k, 8k & 16k Hz centers
that offer ±12dB adjustment to help eliminate feedback & enhance tone for
the main or monitor mix.
EFFECTS 1,2, 3 & 4 Returns.
PHONES & METER SOURCE
The stereo PHONES control sets the level of the PHONES jack. The PFL,
L/R, MONO, MON 1-MON 6, USB IN, and REC OUT USB switches
allow for monitoring of these sources through the headphones and the L/R
LED METERS.
MONITOR 1-6 MASTER OUTPUT CONTROLS
L/R LED VU METERS
10 LED’s offer 6 dB increment resolution that give
the operator a visual indication of the mixer’s output levels, selectable by the
METER SOURCE or PFL switches.
MONO/SUB CONTROL
A mono output is created from the
L/R
master faders (post) for center,
subwoofers, or side fill speakers.
4 BUS COMPRESSORS & LINK SWITCHES
Master
GROUP/SUB-MIX FADERS 1-4
Once a channel has been assigned to one of these faders, the mixing
process is simplified to using these four faders. By assigning the 4
faders to the Master L-R faders, the operator can use the faders to
sub-mix groups.
GROUP ASSIGNMENT SWITCHES
send the sub-group mix to the
main L/R faders. For mono mixing, assign to both L/R.
MASTER L/R FADERS
adjust the level of the main stereo output created
by all channels and groups assigned to L/R faders.
DUAL STEREO EFFECT PROCESSORS The dual internal 24-BIT stereo
processors feature Echo, Reverb, Chorus and Flange. Each effect has select-
able parameters (up to 256) to tailor the effect. Both processors feature a
RETURN TO MONITORS.
7
To Next Page
Loading...
