EFFECTS ALGORITHMS
EFFECTS ALGORITHMS
PHASER & FLANGER
(60-64) PHASER POSITIVE FEEDBACK
(65-69) PHASER NEGATIVE FEEDBACK
The Phaser or "phase shifter" is a classic effect. It uses phase cancellation to create a sweeping effect. This is great for
solos and rhythm guitars when you need them it to stand out.
PHASER PARAMETERS
FF-Feedback polarity
Allows you to select either positive feedback (thicker sound) or negative feedback (thinner sound).
SP-Modulation speed
Controls (LFO) speed of phase.
PF-Phaser frequency
This allows you to choose what frequency you want effected.
Fd-Feedback
Allows you to control how dramatic the effect is.
(70-79) FLANGER
A Flanger is very similar to a chorus. It is a modulation effect, but where it differs from chorus is its ability to loop back
into itself. Before digital delay effects were available, the flanging effect could be accomplished by playing two tape
machines in synchronization, then causing one tape to become slightly out of sync by dragging a finger on the tape reel
the result is an airplane-like sound or sound reflections in a metal pipe.
(70-74) positive feedback
(75-79) negative feedback
FLANGER PARAMETERS
FF-feedback polarity
Allows you to choose either positive feedback (thicker sound) or negative feedback (thinner sound).
SP-modulation Speed
Controls speed of the Flanger.
DP-Depth
Controls the intensity of the Flanger.
Fd-Feedback
Controls how much feedback is put back into the input of the module.
Ib-input bandwidth
Selects which part of the frequency is effected (between high and low).
12
To Next Page
Loading...
Need help?
General
