CAS CL8000 Series - Keypad Settings in Sales Mode; Product Keypad Settings Modification

49
2.1.5. Change keypad settings on the sales mode
2.1.5.1. Change a product keypad settings
- You can set Product keypad settings directly on the sales screen
This function operates only when Keypad Arrangement Method is ‘MANUAL’ in
<3.6.4.4> Keypad Config.
1) If you press a product keypad for 3 seconds, the keypad setting window pops up.
If you change the setting, it is applied immediately to the sales screen.
[Before]