1.
GENERAL
1.1.
PRECAUTION
Warning Precautions when installing the scale. To ensure that you get the
most from your scale, please follow these instruction.
Do not disassemble the scale.
When any damage or defect occurs, contact your
CAS authorized dealer immediately for proper repair.
Do not overload beyond the maximum weight limit.
Scale must be grounded to minimize electricity static.
This will minimize defect or electric shock.
Do not pull the plug by its cord when unplugging.
Damaged cord could cause electric shock or fire.
To prevent from fire occurring, Do not place or use
the scale near flammable or corrosive gas.
To reduce electric shock or incorrect reading,
Do not spill water on the scale or place it in
humid condition.
Avoid placing the scale near heater or in direct sunlight.
To Next Page
Loading...
