2.
GENERAL
4
OVERVIEW
Congratulations on your recent purchase of your XR
TM
Series Salt Chlorinator.
Please take a moment to read through the entire manual before installing your new unit.
Your chlorinator must be installed and operated as specified.
While every effort has been made to ensure that the information contained in this guide is accurate
and complete, no liability can be accepted for any errors or omissions. Crystal Aquatic Systems
reserves the right to change the specifications of the hardware and software described herein at
any time without prior notice.
Please remember that your XR Series Salt Chlorinator is not designed to chemically maintain your
pool water and keep it balanced, but rather to produce chlorine from a mild salt solution within
the water. We encourage regular water testing, balancing and correction if, and when required to
maintain the recommended balanced levels of your pool water. This is a vital part of a complete
maintenance program and will ensure trouble free performance as well as a healthy and sparkling
clean pool.
The models available are 10, 15, 25, 25LS, 35, 35LS 45 and 55HD in both systems with timer and
pump outlet or without. All are reverse polarity units designed to automatically change direction
every 7 hours. See 5.13 Modifying the Polarity Change Times to change the reversing times
from 4
– 10 hours. This change of polarity causes the calcium to dislodge and keep the cell plates clean.
Please note occasional cleaning of the electrode plates may still be necessary in pools with high
or extremely hard calcium.
Thank you again for choosing an XR Series Salt Chlorinator.
We wish you many happy years of swimming in your crystal-clear pool.
XR with timer and pump outlet XR without timer and pump outlet
XR Cell Housing and Cell
To Next Page
Loading...
Need help?
General
