CAS DB-II User Manual

Press the SAMPLE( ) key
to set up time, “00,00,00”
is shown on the display.
Press the HOLD( ) or
PRINT( ) key to have
number up or down. To enter
next digit, press the
SAMPLE( ) key.
Press the SET key to save.
“tisave” is shown on the
display.
If you do not want to save time, press the ZERO key.
19
Press the SAMPLE(
) key,
the display shows
“00,00,00”.
Press the HOLD(
) or
PRINT( ) key to have
number up or down. To enter
next digit, press the
SAMPLE( ) key.
Press the SET key to save.
“dysave” is shown on the
display and then the display
shows a day of the week.
You can change the day by
pressing the HOLD(
) or
PRINT( ) key. If you set up
a day of the week wrong,
“Wk err” is shown on the
display.
Press the SET key to save.
“Wksave” is shown on the
display.
If you do not want to save,
press the ZERO key.
4. How to Enter Time
Press the MODE key until the
display shows “ti ON”. It
means that time is printed
out.
If you do not want to print out time, press the HOLD(
) key.
3. How to Enter Date
Press the MODE key until the
display shows “dy ON”. It
means that date is printed out.
If you do not want to print out date, press the HOLD(
) key.
18
Italic Bold: Default Setting
MENU DISPLAY DESCRIPTIONS
Date
“ dy on ” Print out date/day.
“ dy oFF ” Do not print out date/day.
Time
“ ti on ” Print out time.
“ ti oFF ” Do not print out time.
Label
“ LA off ” Do not print out label caption.
“ LA on ” Print out label caption.
Default
“ dF no ” Default setting is released.
“ dF YES ” Everything is setup in default.

CAS DB-II Specifications

General

Brand	CAS
Model	DB-II
Category	Scales
Language	English