Need help?Do you have a question about the CAS MWP and is the answer not in the manual?
General| Display | LCD |
|---|---|
| Units | kg, g, lb, oz |
| Power | Battery |
| Operating Temperature | 40°C |
| Capacity | 30 kg |
Essential safety measures for operating the scale safely and dependably.
Verifies the included components such as scale, pan, and accessories.
Illustrates the process of installing the protective plastic shield.
Guidance on selecting a suitable location and leveling the scale for accurate measurements.
Instructions for connecting the scale to AC power or using battery power.
Recommendation for span calibration before first-time use for accuracy.
Explains display symbols and the functions of each key on the scale.
Covers unit selection, zeroing, and tare functions in weighing mode.
Explains how to use the scale for counting parts based on sample weight.
Details on performing percentage weighing calculations.
Procedure to calibrate the scale's span using reference weights.
Configures the default unit displayed when the scale is turned on.
Allows enabling or disabling specific weighing units for use.
Configures the time delay before the scale automatically powers off.
Selects how data is transmitted (e.g., stable, manual, display).
Sets the communication speed for the RS232 interface.
Adjusts the sensitivity for detecting stable readings.
Sets the ranges for the zero display and auto-zero recovery functions.
Enables or disables auto-averaging for sampling in counting mode.
Chooses the backlight operation mode (auto, on, off).
Procedure for performing automatic calibration of the scale.
Resets scale settings to factory defaults.
Lists common error messages and their potential causes.
Details the interface modes, signal type, and connector pinout.
Defines the structure and content of data transmitted by the scale.
Provides practical examples of transmitted data strings.
Specifications for scale capacity, readability, and displayed resolution across models.
Details operating temperature, humidity, and power requirements.
Provides scale dimensions and pan size for different capacity models.
To Next Page
