CAS DL-30 User Manual

9
USING ADAPTOR
Convert switch to AC 110V or 220V.
Use only adaptor DC 9V/300mA.
Connect the adaptor into AC outlet and
insert plug into the jack on the scale.
Press the ON/OFF key.
1. Power Source
USING BATTERIES
Prepare six pieces of DC 1.5V(CM) batteries.
Open the cover in the back of the scale and insert the batteries as shown in
Fig.1.
Close the cover and press the ON/OFF key then the scale is on.
If you have low battery, the display shows “Err-5” as Fig.2 and the scale is off
automatically.
OPERATIONS
+
-
+
-
+
-
+
-
+
-
+
-
Fig.1 Fig.2
+
-
Fig.3
kg
ZERO
kg
2. General Weighing
When the display is not zero though there is nothing on the platter, press the
ZERO key.
Place a commodity on the
platter.
Remove the commodity
from the platter.

CAS DL-30 Specifications

General

Brand	CAS
Model	DL-30
Category	Scales
Language	English