12
d.Tare function
Tare means the weight of container. You may use tare function when you weigh an item
with container and measure only the weight of item.
■ One time tare
① Place a container on the platter.
Ex) 200g of tare.
② Press TARE key to set zero point.
EX) 200g of tare.
■ Successive tare
① Place another container on the platter.
Ex) 100g of tare
② Press TARE key to set zero point
③ After weighing item remove all of the
container from the platter.
④ Press TARE key again to set zero.
■ Preset tare
To Next Page
Loading...
Need help?
General
