15
b. Saving valid date set on PLU
This section explains how to save valid date in PLU.
You can input the valid date. Range is 0 ~ 999.
Valid date Packed on date Sell by date Remarks
0 07.12.11 (Today) (No print)
1 07.12.11 (Today) 07.12.11(Today)
2 07.12.11(Today) 07.12.12(Tomorrow)
999 07.12.11(Today) 10.09.03(After 998 days)
① Press numeric key to input a vaild date
Ex) Sell by 9 days after
② Press “
” key to save it.
c. Saving PLU name
● C key is to input, save a character, and move to next character (or byte).
● TARE key is to move next programming menu.
①Input appropriate ASCII codes to save the PLU
name. Please refer to the ASCII table on page ※
42.
Ex) “APPLE” is “4, 1, C, 5, 0, C, 5, 0, C,
4, C(alphabet), C, 4, 5, C”
② Press TARE key to exit to normal
weighing mode or C key up to maximum
16th byte. Then automatically exit to normal
weighing mode.
To Next Page
Loading...
