CAS ER PLUS SERIES - Suspend Mode and Printer Setup

21
e. Suspend mode function
(Only LED version)
This section explains how to set a time to suspend mode.
Table :
Options Description Remarks
OFF No suspend mode.
20(seconds) Suspend mode in 20 seconds when no use.
40(seconds) Suspend mode in 40 seconds when no use.
60(seconds) Suspend mode in 60 seconds when no use. Default
f. Selecting the printer
This section explains how to select the printer option when you’d like to use the printer connected to
ER
PLUS.
Table :
Options Description Remarks
NON No printer in use
DEP-50 DEP-50 printer interface
DLP-50 DLP-50 printer interface
① Press ZERO key to move next function
setting, suspend mode.
② Press TARE key to select a time to suspend
mode.
① Press ZERO key to move next function
setting, selecting the printer
② Select the printer you’re using with ER
PLUS
by Pressing TARE key.
Ex) DEP- 50