41
40
Table : Error Message
Error Message
Description Solution
on Display
"Err 1"
"Err 2"
"Err 10"
"Err 11"
"Err 12"
"Err 13"
"Help 1"
"Help 3"
"Help 4"
"Help 5"
Please call your CAS dealer.
Please call your CAS dealer.
Please call your CAS dealer.
Please call your CAS dealer.
Please call your CAS dealer.
Please call your CAS dealer.
Please remove the item
from the platter.
Spend again accumulated
TTP value after delete
Input again Euro factor
value.
Pay value than Total sale
amount of money bigger
value or same value input
Spend again accumulated
DTP value after delete
The "Err 1" occurs when a current zero point has
shifted from the last span calibration.
The "Err 2" is not a real error. Only it prompts
return CAL switch to the normal position.
The "Err 10" means a failure of the analog module.
Replace the analog module by a new one.
The "Err 11" means a writing error of the internal
nonvolatile memory. To recognize this error, be
sure to check the voltage on the circuit and do
calibration procedures.
The "Err 12" warns that the scale has lost the
parameters for weighing regulations or has lost
the factors for a digital span calculation.
The "Err 13" means the soft key code is broken.
"Help 1" is marked in case of zero extent
exceeded.
"Help 3" is marked in case sale number of times
exceeds 99.
"Help 4" is marked in case Euro factor value is "0"
at Euro rate application.
"Help 4" is maked when input smaller Pay cost
than Total sale amount of money at Pay function
use.
"Help 5" is marked when DTP number of times is
more than 50000 times.
Table : SPECIFICATION
MODEL ER Series
CAPACITY
(Single Range)
DISPLAY
Weight
Unit Price
Total Price
SYMBOL ON DISPLAY
MAXIMUM TARE
OPERATING TEMPERATURE
POWER SOURCE
POWER CONSUMPTION
PLATTER SIZE (mm)
PRODUCT SIZE (mm)
6 x 0.002 kg 15 x 0.005 kg 30 x 0.001 kg
5 digits
6 digits
6 digits
Power, Zero, Tare, Low battery, Backlight (Option for LCD version)
6.000 kg - 9.995 kg - 9.990 kg
-10
~+40
110VAC, 120VAC, 220VAC, 240VAC / 50 Hz, 60Hz
Approximately 10W
304 (W) X 220 (D)
360 (W) X 350 (D) X 106 (H)
Notice: specifications are subject to change for improvement without notice.
To Previous Page
Loading...
