Need help?Do you have a question about the CAS NT-201S and is the answer not in the manual?
General| Capacity | 200 g |
|---|---|
| Readability | 0.001 g |
| Linearity | ±0.002 g |
| Pan Size | Ø80 mm |
| Display | LCD |
| Resolution | 0.001 g |
| Accuracy | ±0.002 g |
| Repeatability | 0.001 g |
| Units | g, ct, oz, dwt |
| Interface | RS-232 |
| Measurement Range | 0 ~ 200 g |
| Operating Humidity | 80% RH or less |
| Power | AC adapter or 4 AAA batteries |
| Power Supply | AC adapter or 4 AAA batteries |
Lists essential safety measures to prevent hazards and ensure proper operation of the indicator.
Illustrates the front panel of the NT-201A, detailing display lamps and their meanings.
Details the function of each key, including ZERO, TARE, GROSS/NET, and PRINT keys.
Explains the procedure to enter the device's diagnostic test mode.
Guides users on how to access and navigate the System Mode for device configuration.
Provides instructions on how to access the Calibration Mode by manipulating the CAL switch.
Explains navigation within Calibration Mode using keys for different calibration types.
Details steps for weight calibration, including unit selection and multi-calibration settings.
Guides on setting CAL 0 (Multi-Calibration), CAL 1 (Max Capacity), CAL 2 (Min Division), CAL 3 (Zero), CAL 4 (Weight), CAL 5 (Span).
Guides users on accessing the Set Mode (Function Mode) from the normal weighing mode.
Provides wiring diagrams and instructions for connecting the indicator to a PC via COM1.
Explains the structure and data format for CAS protocol communication.
Lists available commands for controlling the indicator and reading data via command mode.
Lists common error codes, their reasons, and recommended solutions for troubleshooting issues.
To Next Page
