- 3 -
0. Precaution
Observe the following safety precautions
:
Do not disassemble the indicator
.
Indicator must be grounded to minimize electricity static.
This will minimize
defect or electric shock.
Do not pull the plug by its cord when unplugging. Damaged cord could
cause electric shock or fire.
Do not place or use the indicator near flammable or corrosive gas
.
To reduce electric shock or incorrect reading, do not spill water on the
scale or place it in humid condition
.
Avoid placing the indicator near heater or direct sunlight
.
Insert plug firmly to wall outlet to prevent electric shock.
For consistent and accurate reading, maintain periodical check by
your CAS authorized dealer.
Avoid sudden shock to the indicator. Internal mechanism could be
damaged
.
Place the indicator on firm and temperature consistent environment
.
Keep the indicator away from other electromagnetic generating devices.
This may interfere with accurate reading
.
Our Dealers:
CAS feels that each of its valued customers should get the
best service available. Whether it’s the initial installation of our product,
maintenance/repair work, or simply answering questions about our
products, CAS Corporation and all of its Authorized Dealers are highly
trained to assist you with any need regarding CAS products.
To Next Page
Loading...
