CAS SW-II Series Service Manual

`
10
CAS ELECTRICS CO.,LTD
After turning on the power scale, while the display are turned on, press the [TARE] key you can change the
user settings. Press [TARE] key, and move digits (digit shift) is possible, pressing the [MODE] key to
increase the number. After finishing the setting, press the [ZERO] key to save, and exit from the menu.
DIGIT
Description
Value
Description
DIGIT 6
Use Back light
0
Don't use
1
Use
DIGIT 5
Use kg
0
Don't use
1
Use
DIGIT 4
Use lb
0
Don't use
1
Use
DIGIT 3
Use gram
0
Don't use
1
Use
DIGIT 2
Use oz
0
Don't use
1
Use
DIGIT 1
Default Weight
Unit
0
Use kg
1
Use lb
2
Use gram
3
Use oz
(2) AD test function
If after turning on the power scale, press the [MODE] key nit, you can check the AD value. In this case,
press [ZERO] key to exit to the weighing mode.

CAS SW-II Series Specifications

General

Brand	CAS
Model	SW-II Series
Category	Scales
Language	English